complete erection

сущ.

Ex: In the attempt to match the above criteria, there are two fundamentally distinct avenues to the construction of the schedules of a classification scheme.

Ex: Library governing boards need a solid understanding of building sciences, prior to launching a new construction, renovation, or addition project.

Ex: Out of 18 different education programs conducted by small companies, two-thirds were conducted by manufacturing companies, the remainder were in health services, construction, or transportation companies.

Ex: The war years heralded several changes, one of them being the erection of a new library building.

Ex: Golf courses are emerging as one of the most environmentally rapacious and socially divisive forms of tourist and property development.

* asesor técnico en construcción de bibliot = library building consultant.

* bloque de construcción = building block.

* ciencias de la construcción = building sciences.

* construcción de caminos = road construction.

* construcción de carreteras = road construction.

* construcción de casas = building construction.

* construcción de diques = diking [dyking].

* construcción de edificios = building construction.

* construcción de muros = walling.

* construcción de presas = damming.

* construcción de represas = damming.

* construcción naval = shipbuilding.

* Construcción Pasiva de un Verbo = get + Participio.

* de construcción básica = brick and frame.

* de construcción sólida = solidly-built.

* en construcción = under development, under construction.

* en proceso de construcción = under construction.

* industria de la construcción, la = construction industry, the, building industry, the.

* ingeniería de la construcción = construction engineering.

* material de construcción = building material.

* obrero de la construcción = construction worker.

* permiso de construcción = building permit.

* proyecto de construcción = construction project.

* suministros de construcción = building supplies.

* técnica de construcción = construction technique.

 

construcción sustantivo femenino


obrero de la construcción building o construction worker


construcción sustantivo femenino
1 (edificio) building: las construcciones de la zona no aguantaron el temblor de tierra, the buildings in the area did not withstand the earthquake
2 (acción) construction: la construcción de la catedral tardó más de un siglo, it took over a century to complete construction of the cathedral
3 (industria) trabajo en la construcción, I work in the building industry
' construcción' also found in these entries:
Spanish:
ampliación
- concatenación
- elevada
- elevado
- escora
- fortaleza
- gremio
- grúa
- hundir
- hundimiento
- hundirse
- levantar
- parecerse
- promotor
- promotora
- promover
- resaltar
- urbanización
- barraca
- carpintería
- en
- fuente
- licitación
- madera
- material
- obra
- robusto
- tosco
- vivienda
English:
advocate
- building
- construction
- defence
- defense
- demonstrate
- deserve
- erect
- erection
- flimsy
- fountain
- mention
- rough
- shipbuilding
- solidly
- sound
- structure
- timber
- tumble
- well-built
- ship
[de edificio, muro] construction, building; [de buque] building; [de automóvil, aeronave] manufacture; [de mueble] making, building; construcción naval shipbuilding

- (газотурбинный, поршневой, тепловой) — engine
- (гидравлический, пневматический, электрический) — motor
-, авиационный — aircraft engine
двигатель, используемый или предназначенный к использованию в авиации для перемещения и (или) поддержания ла, на котором он установлен, в воздухе (рис. 46). — an engine that is used or intended to be used in propelting or lifting aircraft.
- аналогичной конструкции — engine of identical design and сonstruction
- без наддува (ид) — unsupercharged engine
-, безредукторный — direct-drive engine
-, безредукторный винто-вентиляторный (незакопоченный) — unducted fan engine (udf)
винтовентиляторы вращаются непосредственно силовой (свободной) турбиной с противоположным вращением рабочих колес. — fans are driven directly by a counter-rotating turbine, eliminating complexity of a reduction gearbox.
-, бензиновый — gasoline engine
-, боковой (рис. 13) — side engine
- в подвесной мотогондоле — pod engine
-, вентиляторный, с противоположным вращением вентиляторов — contrafan engine
- вертикальной наводки, приводной (стрелкового вооружения) — (gun) elevation drive motor
-, винто-вентиляторный (тввд) — prop-fan engine
-, включенный (работающий) — operating/running/engine
-, внешний (по отношению к фюзеляжу) (рис. 44) — outboard engine
- внутреннего сгорания — internal-combustion engine
-, внутренний (по отношению к наружному двигателю) (рис. 44) — inboard engine
- воздушного охлаждения (пд) — air-cooled engine
двигатель, у которого отвод тепла от цилиндров производится воздухом, непосредственно обдувающим их. — an engine whose running temperature is controlled by means of air cooled cylinders.
-, вспомогательный (всу) — auxiliary power unit (apu)
-, выключенный — shutdown engine
-, выключенный (неработающий) — inoperative engine
-, высокооборотный — high-speed engine
-, высотный — high-altitude engine
-, газотурбинный (гтд) — turbine engine
-, газотурбинный (вертолетныи) — helicopter turboshaft engine
-,газотурбинный-энергоузел (стартер-энергоузел) — turbine-starter - auxiliary power unit, starter - apu
- (-) генератор — motor-generator
устройство для преобразования одного вида эл. энергии в другую (напр., переменный ток в постоянный). — а motor-generator combination for converting one kind of electric power to another (e.g. ас to dc)
- горизонтальной наводки, приводной (стрелкового вооружения) — (gun) azimuth drive motor
- двухвальной схемы (турбовальный) — two-shaft turbine engine
-, двухвальный турбовинтовой — two-shaft turboprop engine
-, двухвальный турбореактивный — two-shaft /-rotor, -spool/turbojet engine
-, двухкаскадный — two-rotor /-shaft, -spool/ engine, twin-spool engine
двухвальный турбореактивный двигатель называется также двухроторным или двухкаскадным двигателем. — а two-rotor engine is a twoshaft or two-spool engine with lp and hp compressors and hp and lp turbines.
-, двухкаскадный, двухконтурный, (турбореактивный) — two-rotor /twin-spool/ by-pass turbo-jet engine
-, двухкаскадный, турбовальный, газотурбинный, со свободной турбиной — two-rotor /twin-spool/ turboshaft engine with free-power turbine
-, двухкаскадный, турбовентиляторвый с устройством отклонения направления тяги — two-rotor /twin-spool/ turbofan engine with thrust deflector system
-, двухконтурный — by-pass /bypass/ engine
гтд, в котором, помимо основного внутреннего (первого) контура, имеется наружный (второй) контур, представляющий собой канал кольцевого сечения, оканчивающийся у реактивного сопла. — in а by-pass engine, a part of the air leaving the lp cornpressor is dueted through the by-pass duct around the engine main duct to the exhaust unit to be exhausted to the atmosphere.
-, двухконтурный с дожиганиem во втором контуре — duct-burning by-pass engine
-, двухконтурный со смешиванием потоков наружного и и внутренного контуров — by-pass exhaust mixing engine
-, двухроторный — two-rotor engine
- двухрядная звезда (пд) — double-row radial engine
двигатель, у которого цнлиндры расположены двумя рядами радиально относительнo одного oбщего коленчатоro вала. — an engine having two rows of cylinders arranged radially around а common crankshaft. the corresponding front and rear cylinders may or may not be in line.
-, двухтактный (пд) — two-cycle engine
-, дозвуковой — subsonic engine
-, доработанный по модификации (1705) — engine incorporating mod. (1705), post-mod. (1705) engine
-, звездообразный — radial engine
поршневой двигатель с радиальным расположением цилиндров, оси которых лежат в одной, двух или нескольких плоскостях, перпендикулярных к оси коленчатого вала — an engine having stationary cylinders arranged radially around а commom crankshaft.
-, звездообразный двухрядный — double-row radial engine
-, звездообразный однорядный — single-row radial engine
-, исполнительный (эл.) — (electric) actuator, servo motor
-, исполнительный, канала курса (крена или тангажа) (гироплатформы) — azimuth (roll or pitch) servornotor
-, карбюраторный (пд) — carburetor engine
-, коррекционный (гироскопического прибора) — erection torque motor
-, критический — critical engine
двигатель, отказ которого вызывает наиболее неблагоприятные изменения в поведении самолета, управляемости и избытке тяги. — "critical engineп means the engine whose failure would most adversely affect the performance or handling qualities of an aircraft.
-, крыльевой (установленный на крыле) — wing engine
- левого вращения — engine of lh rotation
-, маломощный — low-powered engine
-, многорядный (пд) — multirow engine
-, многорядный звездообразный — multirow radial engine
-, модифицированный — modified engine
- модульной конструкции — module-construction engine

lp compressor - module i, hp compressor - module 2, etc.
-, мощный — high-powered engine
-, недоработанный no модификацин (1705) — engine not incorporating mod. (1705), pre-mod. (1705) engine
-, незакапоченный — uncowled engine
- непосредственного впрыска (пд) — fuel injection engine
-, неработающий — inoperative engine
-, одновальный (гтд) — single-shaft /single-rotor/ turbine engine
-, одновальный двухконтурный — single-shaft /single-rotor/ bypass engine
-, одновальный турбовентиляторный — single-shaft /single-rotor/ turbofan engine
-, одновальный турбовинтовой — single-shaft turboprop engine
-, одновальный турбореактивный — single-shaft /single-rotor/turbojet engine
-, однорядный (пд) — single-row engine
-, опытный — prototype engine
двигатель определенного тиna, еще не прошедший типовые государственные испытания. — the tirst engine of a type and arrangement not approved previously, to be submitted for type approval test.
-, основной — main engine
-, оставшийся (продолжающий работать) — remaining engine
-, отказавший — inoperative/failed/ engine
- отработки (эл., исполнительный) — servomotor
- отработки следящей системы — servo loop drive motor
- подтяга (патронной ленты) — ammunition booster torque motor
-, поперечный коррекционный (авиагоризонта) — roll erection torque motor
-, поршневой (пд) — reciprocating engine
- правого вращения — engine of rh rotation
-, продольный коррекционный (авиагоризонта) — pitch erection torque motor
-, прямоточный — ramjet engine
двигатель без механического компрессора, в котором сжатие воздуха обеспечивается поступательным движением самого двигателя. — а jet engine with no meehanical compressor, and using the air for combustion compressed by forward motion of the engine.
- работающий — operating engine
-, работающий с перебоями — rough engine
двигатель, работающий с неисправной системой зажигания или подачи топлива (рабочей смеси) — an engine that is running or firing unevenly, usually due to а faulty condition in either the fuel or ignition systems.
- рамы крена (гироплатформы — roll-gimbal servomotor
- рамы курса (гироплатформы — azimuth-gimbal servomotor
- рамы тангажа (гироплатформы) — pitch-gimbal servomotor
-, реактивный — jet-engine
двигатель, в котором энергия топлива преобразуется в кинетическую энергию газовой струи, вытекающей из двигателя, a получающаяся за счет этого сила реакции нenоcредственно используется как сила тяги для перемещения летательного аппарата. — an aircraft engine that derives all or most of its thrust by reaction to its ejection of combustion products (or heated air) in a jet and that obtains oxygen from the atmosphere for the combustion of its fuel.
-, реактивный, пульсирующий — pulse jet (engine)
применяется для непосредственного вращения несущеro винта вертолета. — pulse jets are designed for helicopter rotor propulsion.
-, ремонтный — overhauled engine
серийный двигатель, отремонтированный или восстановленный до состояния, удовлетворяющего требованиям серийного стандарта, и пригодный для дальнейшей эксплуатации в течение установленного межремонтного ресурса. — an engine which has been repaired or reconditioned to а standard rendering it eligible for the complete overhaul life agreed by the national authority.
- с внешним смесеобразованием (пд) — carburetor engine
двигатель внутреннего сгорания, у которого горючая смесь образуется вне рабочего цилиндра. — an engine in which the fuel/air mixture is formed in the carburetor.
- с внутренним смесеобразованием — fuel-injection engine
двигатель, у которого горючая смесь образуется внутри рабочего цилиндра. — an engine in which fuel is directly injected into the cylinders.
- с водяным охлаждением (пд) — water-cooled engine
- с высокой степенью сжатия — high-compression engine
- с нагнетателем (пд) — supercharged engine
- с наддувом (пд) с осевым компрессором (пд) — supercharged engine axial-flom turbine engine
- с передним расположением вентилятора — front fan turbine engine
- с противоточной камерой сгорания (гтд) — reverse-flow turbine engine
- с редуктором — engine with reduction gear
- с форсажной камерой (гтд). двигатель с дополнительным сжиганием топлива в специальной камере за турбиной — engine with afterburner, afterburning engine, reheat(ed) engine, engine with thrust augmentor
- с форсированной (взлетной) мощностью — engine with augmented (takeoff) power rating
- с центробежным компрессором (гтд) — radial-flow turbine engine
-, серийный — series engine
двигатель, изготовляемый в серийном производстве и соответствующий опытному двигателю, принятому при государственных испытаниях для серийного производства. — an engine essentially identiin design, in materials, and in methods of construction, with one which has been approved previously.
- со свободной турбиной — free-luroine engine
двигатель с двумя турбинами, валы которых кинематически не связаны. одна из турбин обычно служит для привода компрессора, а другая используется для передачи полезной работы потребителю, например, воздушному (или несущему) винту. — the engine with two turbines whose shafts are not mechanically coupled. one turbine drives the compressor, and the other free turbine drives the propeller or rotor.
- следящей системы по внутреннему крену (гироплатформы) — inner roll gimbal servomotor
- следящей системы по наружному крену (гироплатформы) — outer roll gimbal servomotor
- следящей системы по курсу (гироплатформы) — azimuth gimbal servomotor
- следящей системы по тангажу (гироплатформы) — pitch gimbal servomotor
-, собственно — engine itself
-, средний (рис. 44) — center engine
- стабилизации гироплатформы — stable platform-stabilization servomotor/servo/
-, стартовый (работающий при взлете) — booster
-, стартовый твердотопливный — solid propellant booster
-, трехкаскадный, турбореактивный, с передним вентилятором — three-rotor /triple-spool, triple shaft/ front fan turbo-jet engine
-, турбовентиляторный — turbofan engine
двухконтурный турбореактивный двигатель, в котором часть воздуха выбрасывается за первыми ступенями компрессора низкого давления, а остальная часть воздуха за кнд поступает в основной контур с камерами сгорания. — in the turbofan engine a part of the air bypassed and exhausted to atmosphere after the first (two) stages of lp compressor. about half of the thrust is produced by the fan exhaust.
-, турбовентиляторный (с дожиганием в вентиляторном контуре) — duct-burning turbofan engine
-, турбовинтовентиляторный — (turbo) propfan engine, unducted fan engine (ufe)
-, турбовинтовой (твд) — turboprop engine
газотурбинный двигатель, в котором тепло превращается в кинетическую энергию реактивной струи и в механическую работу на валу двигателя, которая используется для вращения воздушного винта. — а turboprop engine is a turbine engine driving the propeller and developing an additional propulsive thrust by reaction to ejection of combustion products.
-, "турбовинтовой" (вертолетный, с отбором мощности на вал) — turboshaft engine
-, турбовинтовой, с толкающим винтом — pusher-turboprop engine
-, турбопрямоточный — turbo/ram jet engine
комбинация из турбореактивного (до м-з) и прямоточного (для больших чисел м). — combines а turbo-jet engine (for speeds up to mach 3) and ram jet engine for higher mach numbers.
-,турбо-ракетный — turbo-rocket engine
аналог турбопрямоточному двигателю с автономным кислородным питанием, — а turbo/ram jet engine with its own oxygen to provide combustion.
-, турбореактивный — turbojet engine
газотурбинный двигатель (с приводом компрессора от турбин), в котором тепло превращается только в кинетическую энергию реактивной струи. — a jet engine incorporating a turbine-driven air compressor to take in and compress the air for the combustion of fuel, the gases of combustion being used both to rotate the turbine and to create a thrust-producing jet.
-, установленный в мотогондоле — nacelle-mounted engine
-, установленный в подвесной мотогондоле — pod engine
-, четырехтактный (поршневой — four-cycle engine
за два оборота коленчатого вала происходит четыре хода поршня в каждом цилиндре, по одному такту на ход. такт 1 - впуск всасывание рабочей смеси в цилиндр), такт 2 - матке рабочей смеси, такт 3 - рабочий ход (зажигание смеси), такт 4 - выхлоп (выпуск отработанных газов из цилиндра в атмосферу) — a common type of engine which requires two revolutions of the crankshaft (four strokes of the piston) to complete the four events of (1) admission of or forcing the charged mixture of combustible gas into the cylinder, (2) compression of the charge, (3) ignition and burning of the charge, which develops pressure (power) acting on the piston and (4) exhaust or expulsion of the charge from the cylinder.
-, шаговой (эл.) — step-servo motor
-, электрический — electric motor
устройство, преобразующее электрическую энергию во вращательное механическое движение. — device which converts electrical energy into rotating mechanical energy.
- (-) энергоузел, газотурбинный (ггдэ) — turbine starter /auxiliary power unit, starter/ apu
для запуска основн. двигателей, хол. прокрутки (стартерный режим) и привода агрегатов самолета при неработающих двигателях (режим энергоузла), имеет свой электростартер.
в зоне д. — in the region of the engine
выбег д. — engine run-down
гонка д. — engine run
данные д. — engine data
заливка д. (пд перед запуском) — engine priming
замена д. — engine replacement /change/
запуск д. — engine start
испытание д. — engine test
мощность д. — engine power
на входе в д. — at /in/ inlet to the engine
обороты д. — engine speed /rpm, rpm/
опробование д. — engine ground test
опробование д. в полете — in-flight engine test
опробование д. на земле — engine ground test
останов д. (выключение) — engine shutdown
остановка д. (отказ) — engine failure
остановка д. (выбег) — run down
остановка д. вслествие недостатка масла (топлива) — engine failure due to oil (fuel) starvation
отказ д. — engine failure
перебои в работе д. — rough engine operation
подогрев д. — engine heating
проба д. (на земле) — engine ground test
прогрев д. — engine warm-up
прокрутка д. (холодная) — engine cranking /motoring/
работа д. — engine operation
разгон д. — engine acceleration
стоянка д. (период, в течение которого двигатель не работает) — engine shutdown. one hundred starts must be made of which 25 starts must be preceded by at least a two-hour engine shutdown.
тряска д. — engine vibration
тяга д. — engine thrust
установка д. — engine installation
шум д. — engine noise
вывешивать д. с помощью лебедки — support weight of the engine by a hoist
выводить д. на требуемые обороты % — accelerate the engine to a required speed of %
выключать д. — shut down the engine
глушить д. — shut down the engine
гонять д. — run the engine
заливать д. (пд) — prim the engine
заменять д. — replace the engine
запускать д. — start the engine
запускать д. в воздухе — (re)start the engine
испытывать д. — test the engine
опробовать д. на земле — ground test the engine
останавливать д. — shut down the engine
подвешивать д. — mount the engine
поднимать д. подъемником — hoist the engine
подогревать д. — heat the engine
проворачивать д. на... оборотов — turn the engine... revolutions
прогревать д. (на оборотах...%) — warm up the engine (at a speed of... %)
продопжать полет на (двух) д. — continue flight on (two) engines
разгоняться на одном д. — accelerate with one engine operating
разгоняться при неработающем критическом д. — accelerate with the critical епgine inoperative
сбавлять (убирать) обороты (работающего) д. — decelerate the engine
увеличивать обороты (работающего) д. — accelerate the engine
устанавливать д. — install the engine

- work executed - work in process - work of acceleration - work of deformation - work of ideal cycle - work of resistance - work on arbour - works under way - access to works - actual progress of works - amendment of the date of completion of works - amount of the executed works - applied work - asphalt work - assessment of works - auxiliary work - bank work - bargain work - beat-cob work - betterment work - black and white work - bluff work - bonus work - bosh brick work - branch work - branched work - bright work - carpenter's work - cast steel work - cessation of works - chased work - check of works - checking of works - chequer work - chequered work - cindering work - civil works - civil and erection works - clay work - clearing work - commencement of works - completed works - completion of works - concrete work - diversion work - condensing works - construction works - consumed work - continuous execution of works - contract works - cost of works - cost of uncovering works - covered-up works - date of commencement of works - date of completion of works - day-to-day work - day wage work - dead work - defective works - delay in completion of works - delayed completion of works - demolition works - description of works - design and survey works - desilting works - diaper work of bricklaying - drainage work - dredge work - dressing works - drove work - earth works - effective work - embossed work - emergency works - engineering works - erecting works - erection works - examination of works - excavation works - execution of works - expected period of works - extension of the time for completion of works - external work - face work - fascine work - field works - finely finished work - finishing work - fitter's works - flat trellis work - float work - forming work - forthcoming works - frosted rustic work - gauge work - gauged work - geologic works - geological works - grading works - gunite work - heading work - health work - hot work - hydro-meteorologic works - hydro-meteorological works - inadequate progress of works - incomplete lattice work - indicated work - inlaid work - inspection of works - installation work - intake works - irrigation works - jack works - jobbing work - joggle work - ladder work - line work - link work - locksmith's work - machine work - main works - maintenance work - management of works - maritime works - metal work - milling work - motion work - multiple lattice work - nature of works - neat work - negative work - night work - no-load work - odd works - on the site works - order of execution of works - outlet work - outstanding works - overhead works - panel work - partially completed works - part of works - paternoster work - period of works - period of execution of works - permanent works - pilot-scale work - plane frame work - planer work - pneumatic work - port work - portion of works - pottery work - precision work - preliminary works - preparatory works - pressure cementing work - programme of works - progress of works - proper execution of works - prospecting works - public works - pump works - quantity of works - rag work - R and D work - random work - range work - reclamation work - recoverable-strain work - recuperated work - reflected work - reliability of works - relief work - remedial works - repair work - repairing work - required work - research work - resumption of works - retaining works - reticulated work - right of access to works - river training works - rustic work - safety of works - schedule of works - scope of work - shaper work - sheet metal work - shift work - smith and founder work - spillway works - starting work - step-by-step check of works - step-by-step checking of works - stick and rag work - stoppage of works - subcontract works - submarine work - substituted works - sufficiency of works - supervision for works - supervision for of works - survey work - survey and research works - suspension of works - taking over of works - task work - temporary work - test work - test-hole work - three-coat work - through-carved work - time for completion of works - timely completion of works - tool work - topiary work - topographic works - topographical works - track work - treatment works - trellis work - trench work - trestle work - turning work - uncompleted works - uncovering of works - upon completion of works - variations in works - variations of works - volume of works - wiring work - X-ray work - work of deformation
- work of external forces
- work of internal forces
- above-ground works
- additional work
- agricultural works
- alteration work
- ashlar work
- auxiliary work
- avalanche baffle works
- axed work
- backfill work
- backing masonry work
- bag work
- bench work
- block work
- brewery works
- brick work
- broken-color work
- brush work
- building work
- building site works
- carcass work
- carpenter's work
- cement works
- chemical production works
- civil engineering work
- coast protection works
- cob work
- completed work
- complicated building work
- concrete work
- concrete block masonry work
- concrete masonry work
- constructional work
- construction work
- continuous shift work
- contract work
- coursed work
- crib work
- day work
- dead work
- defective work
- defence works
- deformation work
- demolition work
- development work
- diver's works
- diversion works
- donkey work
- drainage works
- earth work
- earth-moving work
- elastic work of a material
- electric work
- electricity production works
- emergency work
- enclosed construction works
- engineering works
- erection work
- erosion protection works
- excavation works
- experimental work
- external work
- extra work
- facing work
- factory work
- fascine work
- finishing work
- finish work
- floating construction works
- flood-control works
- flood-protection works
- floor work
- floor-and-wall tiling work
- floor covering work
- food industry production work
- foundation work
- funerary works
- further day's work
- gas works
- gauged work
- glazed work
- glazier's work
- half-plain work
- hammered work
- hand work
- handy work
- heat insulation work
- heavy work
- highly mechanized work
- hot work
- in-fill masonry work
- innovative construction work
- insulating work
- intake works
- internal work in the system
- ironmongery work
- joinery work
- land retention works
- landslide protection works
- loading works
- manual work
- marine works
- metallurgical processing works
- night work
- nonconforming work
- office work
- off-the-site work
- one-coat work
- open-air intake works
- open construction works
- ornamental works
- ornate work
- outlet works
- overhang work
- overhead work
- permanent works up to ground level
- petroleum extraction works
- piece work
- pitched work
- plaster work
- plumbing work
- power production works
- precast works
- production works
- promotion work
- protection works
- protective works
- public works
- random ashlar work
- refurbishment work
- refuse disposal works
- refuse incineration works
- regulation works
- reinforced concrete work
- research work
- reticulated work
- road transport works
- roof tiling work
- rubble ashlar masonry work
- sanitary works
- sea defence works
- sediment exclusion works
- sewage disposal works
- single construction works
- smillage-axed work
- solid plaster work
- steel construction works
- steel works
- steel plate work
- structural restoration work
- surface transport works
- temporary works
- textile work
- three-coat work
- tiling work
- training works
- transport works
- treatment works
- two-coat work
- underground work
- underwater work
- unloading works
- vermiculated work
- virtual work
- waste disposal works
- water works
- water treatment works

abandon the takeoff abeam the left pilot position abeam the right pilot position abort the flight abort the takeoff above the glide slope absorb the shock energy accelerate the rotor accelerate to the speed adhere to the flight plan adhere to the track adjust the cable adjust the compass adjust the engine adjust the heading advice to follow the controller's advance affect the regularity affect the safety align the aircraft align the aircraft with the center line align the aircraft with the runway alter the heading amplify the signal apparent drift of the gyro apply the brake approach the beam approve the limitations approve the tariff area of coverage of the forecasts arrest the development of the stall arrive over the aerodrome assess the damage assess the distance assess the suitability assume the control attain the power attain the speed at the end of at the end of segment (полета) at the end of stroke (поршня) at the ground level at the start of cycle at the start of segment (полета) avoid the obstacle backward movement of the stick balance the aircraft balance the control surface balance the propeller bear on the accident before the turbine below the glide slope below the landing minima bend the cotterpin ends be off the track be on the level on the hour block the brake boundary of the area brake the propeller break the journey bring the aircraft back bring the aircraft out by altering the heading cage the gyroscope calibrate the compass calibrate the indicator calibrate the system calibrate the tank cancel the drift cancel the flight cancel the forecast cancel the signal capture the beam carry out a circuit of the aerodrome carry out the flight center the autopilot center the wiper change the frequency change the pitch change the track check the reading chop the power circle the aerodrome clean the aircraft clean up the crack clearance of the aircraft clearance over the threshold clear for the left-hand turn clear the aircraft clear the obstacle clear the point clear the runway climb on the course close the buckets close the circuit close the flight come clear of the ground commence the flight commence the landing procedure compare the readings compensate the compass compensate the error compile the accident report complete the circuit complete the flight complete the flight plan complete the turn compute the visual range conditions beyond the experience conditions on the route considering the obstacles construct the procedure containerize the cargo continue operating on the fuel reserve continue the flight continue the takeoff contribute towards the safety control the aircraft control the pitch convert the frequency convey the information correct the trouble correspond with the operating minima counteract the rotor torque coverage of the chart cover the route crosscheck the readings cross the airway data on the performance decelerate in the flight decelerate the aircraft to decrease the deviation decrease the pitch decrease the speed de-energize the bus define the failure deflate the tire deflect the control surface (напр. элерон) delay the turn delimit the runway delimit the taxiway delineate the runway delineate the taxiway deliver the baggage deliver the clearance denote the obstacle denoting the obstacle depart from the rules departure from the standards depress the pedal detach the load detach the wing determinate the cause determine amount of the error determine the delay determine the extent of damage determine the friction determine the sign of deviation detract from the safety development of the stall deviate from the flight plan deviate from the glide slope deviate from the heading deviation from the course deviation from the level flight discharge the cargo disclose the fares discontinue the takeoff disengage the autopilot displace the center-of-gravity disregard the indicator disseminate the forecast drain the tank draw the conclusion drift off the course drift off the heading drop the nose duck below the glide path ease the aircraft on effect adversely the strength (напр. фюзеляжа) elevation of the strip eliminate the cause of eliminate the hazard eliminate the ice formation eliminate the source of danger (для воздушного движения) enable the aircraft to endanger the aircraft endange the safety endorse the license energize the bus enforce rules of the air engage the autopilot ensure the adequate provisions enter the aircraft enter the aircraft stand enter the airway enter the final approach track enter the spin enter the tariff into force enter the traffic circuit enter the turn entry into the aerodrome zone entry into the flare erection of the gyro establish the characteristics establish the flight conditions establish the procedure exceeding the stalling angle exceed the stop execute the manoeuvre execute the turn expedite the clearance express the altitude extend the agreement extend the landing gear extend the legs extreme aft the center-of-gravity extreme forward the center-of-gravity eye height over the threshold fail into the spin fail to follow the procedure fail to observe the limitations fail to provide the manuals fall into the spin feather the propeller file the flight plan first freedom of the air flight inbound the station flight outbound the station flight over the high seas flight under the rules fly above the weather fly at the altitude fly into the sun fly into the wind fly on the autopilot fly on the course fly on the heading fly the aircraft 2. пилотировать воздушное судно fly the beam fly the circle fly the glide-slope beam fly the great circle fly the heading fly the rhumb line fly under the autopilot fly under the supervision of focus the light follow the beam follow the glide slope follow up the aircraft forfeit the reservation freedom of the air fuel the tank fulfil the conditions gain the air supremacy gain the altitude gain the glide path gain the power gain the speed gather the speed get into the aerodrome get on the course get the height give the way go out of the spin govern the application govern the flight govern the operation grade of the pilot licence guard the frequency handle the baggage handle the flight controls have the runway in sight head the aircraft into wind hold on the heading hold over the aids hold over the beacon hold the aircraft on the heading hold the brake hold the heading on the compass hold the position hold the speed accurately hover at the height of hovering in the ground effect identify the aerodrome from the air identify the aircraft identify the center line impair the operation impair the safety impose the limitations in computing the fuel in conformity with the specifications increase a camber of the profile increase the pitch increase the speed indicate the location from the air inherent in the aircraft initiate the turn install in the aircraft install on the aircraft intercept the beam intercept the glide slope International Relations Department of the Ministry of Civil Aviation interpretation of the signal in the case of delay in the event of a mishap in the event of malfunction introduction of the corrections issue the certificate jeopardize the flight judge the safety keep clear of the aircraft keep out of the way keep tab on the fleet keep the aircraft on keep the altitude keep the ball centered keep the pace keep to the minima kick off the drift kill the landing speed landing off the aerodrome land into the wind land the aircraft latch the pitch stop (лопасти воздушного винта) latch the propeller flight stop lateral the center-of-gravity lay the route lead in the aircraft lead out the aircraft leave the airspace leave the altitude leave the plane leave the runway level the aircraft out lie beyond the range line up the aircraft load the gear load the generator load the structure lock the landing gear lock the landing gear down lock the landing gear up lock the legs longitudinal the center-of-gravity lose the altitude lose the speed loss the control lower the landing gear lower the legs lower the nose wheel maintain the aircraft at readiness to maintain the altitude maintain the course maintain the flight level maintain the flight procedure maintain the flight watch maintain the flying speed maintain the heading maintain the parameter make a complaint against the company make the aircraft airborne make the course change make the reservation manipulate the flight controls mark the obstacle mean scale of the chart meet the airworthiness standards meet the conditions meet the specifications misjudge the distance modify the flight plan monitor the flight monitor the frequency moor the aircraft mount on the frame move off from the rest move the blades to higher move the pedal forward name-code of the route neglect the indicator note the instrument readings note the time observe the conditions observe the instruments observe the readings obtain the correct path obtain the flying speed obtain the forecast offer the capacity off-load the pump on the base leg on the beam on the cross-wind leg on the down-wind leg on the eastbound leg on the final leg on the left base leg on the speed on the upwind leg open the buckets open the circuit open the door inward outward operate from the aerodrome operate under the conditions overcome the obstacle overcome the spring force overflying the runway overpower the autopilot overrun the runway overshoot capture of the glide slope over the territory over the top over the wing park in the baggage participation in the investigation passing over the runway pass the signal past the turbine perform the service bulletin pick up the signal pick up the speed pilot on the controls pitch the nose downward place the aircraft place the flaps in plane of symmetry of the aeroplane plot the aircraft potential hazard to the safe power the bus present the minimum hazard preserve the clearance pressurize the bearing produce the signal profitability over the route prolongation of the rating properly identify the aircraft protect the circuit prove the system pull out of the spin pull the aircraft out of pull the control column back pull the control stick back pull up the helicopter puncture the tire push the aircraft back push the aircraft down push the control column push the control stick put into the spin put on the course put the aircraft into production put the aircraft on the course put the aircraft over raise the landing gear reach the altitude reach the flight level reach the glide path reach the speed reach the stalling angle read the drift angle read the instruments receive the signal record the readings recover from the spin recover from the turn recovery from the manoeuvre recovery from the stall recovery from the turn rectify the compass reduce the hazard reestablish the track regain the glide path regain the speed regain the track register the aircraft release the aircraft release the landing gear release the landing gear lock release the load release the uplock relocate the plane's trim remedy the defect remedy the trouble remove the aircraft remove the crack remove the tangle render the certificate renew the license renew the rating replan the flight report reaching the altitude report reaching the flight level report the heading reset the gyroscope restart the engine in flight restore the system restrict the operations resume the flight resume the journey retain the lever retract the landing gear return the aircraft to service reverse the propeller roll in the aircraft roll into the turn roll left on the heading roll on the aircraft roll on the course roll out of the turn roll out on the heading roll out the aircraft roll right on the heading rotate the aircraft rotate the bogie rules of the air run fluid through the system run off the runway run out the landing gear schedule the performances seat the brush second freedom of the air secure the mishap site select the course select the flight route select the frequency select the heading select the mode select the track angle separate the aircraft serve out the service life set at the desired angle set the course set the flaps at set the heading set the propeller pitch set the throttle lever set up the speed shift the center-of-gravity shop out the skin simulate the instruments responses slacken the cable slave the gyroscope smooth on the heading smooth out the crack smooth out the dent smooth the signal space the aircraft spin the gyro rotor state instituting the investigation (авиационного происшествия) state submitting the report (об авиационном происшествии) steady airflow about the wing steer the aircraft stop the crack propagation stop the leakage submit the flight plan substitute the aircraft supervision approved by the State supply the signal swing the compass swing the door open switch to the autopilot switch to the proper tank takeoff into the wind take off power to the shaft take over the control take the bearing take the energy from take the readings take the taxiway take up the backlash take up the position tap air from the compressor terminate the agreement terminate the control terminate the flight test in the wind tunnel test the system the aircraft under command the route to be flown the route to be followed the runway is clear the runway is not clear the search is terminated through on the same flight throughout the service life tighten the turn time in the air time the valves titl of the gyro to define the airspace transfer the control transit to the climb speed trim the aircraft turn into the wind turn off the system turn on the system turn the proper tank on unarm the system uncage the gyroscope unfeather the propeller unlatch the landing gear unlatch the pitch stop (лопасти воздушного винта) unstall the aircraft unstick the aircraft uplift the freight violate the law wander off the course warn the aircraft wind the generator with decrease in the altitude withdraw from the agreement with increase in the altitude within the frame of within the range withstand the load work on the aircraft write down the readings

- assembly drawing - back elevation drawing - batch of drawings - blueprint drawing - checking of drawings - collective drawing - complete set of drawings - construction project drawings and specifications - correctness of drawings - cross-sectional drawing - design drawings - detail drawing - detailed drawing - diagrammatic sectional drawing - dimensional drawing - dimensioned drawing - dimensions on drawings - dimensions in drawings - elaboration of drawings - elevational drawing - enlarged drawing - erection drawing - explanatory notes to drawings - freehand drawing - front elevation drawing - full-size drawing - general drawing - inscriptions in drawings - installation drawing - isometric drawing - master drawing - out of drawing - perspective drawing - preliminary structural drawings and cost estimates - rough drawing - sample drawing - sectional drawing - shop drawing - submission of drawings - working drawing - approval drawing
- architectural drawing
- as-built drawing
- assembly drawing
- axonometric drawing
- back elevation drawing
- clarification drawing
- cold drawing
- construction drawing
- coordination drawings
- deep drawing
- detail drawing
- dimension drawing
- elevation drawing
- erection drawing
- explanatory drawing
- formwork drawings
- free-hand drawing
- general drawing
- installation drawing
- line drawing
- measured drawing
- mechanical drawing
- orthographic drawing
- outline drawing
- placing drawing
- production drawings
- profile drawing
- record drawing
- scale drawing
- schematic drawing
- shop drawing
- single-line drawing
- structural drawing
- wash drawing
- wire drawing
- working drawing

- abutment joint - abutting joint - adhesive joint - airtight joint - alternate joints - angle joint - angle half-lap joint - arc-welded joint - articulated joint - asymmetric joint - back joint - ball joint - ball-and-socket joint - bayonet joint - bead joint - beam butt joint - beam-to-beam joint - beam-to-beam moment joint - beam-to-column joint - bed joint - bell-and-plain end joint - bell-and-spigot joint - bell butt joint - bellows joint - bevelled joint - bleeding joint - blind joint - bolt joint - bolted joint - bolt-adhesive joint - bracket joint - branch joint - branch tee-saddle joint - brazed joint - brazed-welded joint - breaking joints - brick joint - brickwork joints - bricks joints - bridge joint - bridle joint - broken joints - building wall joints - butt joint - butt-and-collar joint - buttered joint - cable joint - carpenter's joint - cash joint - castellated joint - cast-welded rail joint - caulked joint - caulking joint - cemented joint - centre joint - chamfered joint - chamfered-edge lap joint - circular joint - clamping plate joint - clamping ring joint - clasp joint - cleat joint - clip joint - closed-tee joint - cluster joint - coach joint - cogged joint - collar joint - compensation joint - composite joint - compound for joint sealing - compression joint - concave joint - concealed joint - concrete mix joint - conduit joint - constricted-end joint - construction joint - contact joint - contraction joint - control joint - convex joint - coped joint - corner joint - cornerlock joint - cotter pin joint - coursing joint - couvre joint - cross joint - cross-halved joint - cruciform joint - curb joint - cut joint - dado joint - dead joint - demountable joint - detachable joint - dilatation joint - direct-edge splined joint - disk joint - divided tenon joint - double joint - double-bevel butt joint - double-butt joint - double-lap riveted joint - double-shear joint - dovetail joint - dovetail halving joint - dovetail scarf joint - dowelled joint - draw-band joint - dry joint - dummy joint - eccentric joint - edge joint - edge butt joint - elastic joint - elbow joint - end joint - erection joint - expanded joint - expansion joint - exposed joint - eye joint - face joint - faced joint - false joint - faucet joint - faulty joint - field joint - fillet joint - fillistered joint - finger joint - firm-and-impervious joint - fish-mouth joint - fixed joint - flange joint - flange-to-web joint - flashed joint - flat joint - flexible joint - flush joint - flush-cut joint - flush cylindrical joint - flush taper joint - folded-over joint - forge-welded joint - fork joint - friction joint - full open-corner joint - full-strength joint - gasketless joint - gastight joint - gas-welded joint - girth joint - glue joint - groove joint - grooved and tongued joint - ground joint - grouted joint - half joint - half-lap joint - half-mitre joint - halved joint - header joint - heading joint of flooring boards - hem joint - hinge joint - hinged joint - hollow joint - hook joint - housed joint - impervious joint - inclined joint - inclined tee joint - indented joint - involute splined joint - J-groove joint - joggle joint - joint double-strap lap joint - keyed joint - king-post joint - lap joint - lapped corner joint - lead joint - leakage of joint - leaky joint - ledge joint - lift joint - linear slotted lap joint - lipped joint - lock joint - longitudinal joint - loop joint - loose joint - loose tongue joint - married joints - match joint - milter joint - mortar mix joint - mortise joint - mortise and tenon joint - mortise dowel joint - movable joint - movement of joint - multiple joint - multiple bar joint - nipple joint - oblique joint - open joint - open-butt joint - open-drained joint - opening of joint - open mortise and tenon joint - open tee joint - overlap joint - packed joint - permeable joints - pillow joint - pilot joint - pin joint - pin-connected joint - pipe joint - plain lap joint - poured joint - pressure-welded joint - profiled joint - push joint - racked joint - related joint - rigid joint - ring joint - rivet joint - riveted lap joint with butt strap - rocker joint - rope joint - rotating joint - rubbed joint - rust joint - saddle joint - scarf joint - screw joint - sealing of joints - seamless joint - secret joint - semiflexible joint - shilap joint - shove joint - skew joint - skew scarf joint - sliding joint - slip joint - socket-and-spigot joint - soldered joint - spherical joint - splined joint - split joint - square joint - S-slip joint - step joint - strapped joint - strength joint - strike joint - structural joints - swivel joint - swivel rod joint - tale-to-tale joint - taper joint - tapered-end joint - telescope joint - tenon joint - tension joint - thermit joint - threaded gas pipe joint - tianged-edge joint - tight joint - toe joint - tongue-and-groove joint - tooth cogging joint - transverse joint - treated joint - U-groove joint - unchamfered joint - universal joint - voussoir joint - V-shaped joint - wall-footing joint - water-sealed joint - watertight joint - weathered joint - wedge joint - welded joint - welding joint - woodworking joint - abutting joint
- adhesive-bonded joint
- adhesive joint
- angle joint
- angle half-lap joint
- articulated joint
- aseismic joint
- ball joint
- beam butt joint
- beam-column joint
- bed joint
- bell-and-spigot joint
- birdsmouth joint
- bolted joint
- box dovetail joint
- breaking joints
- break joints
- brick joints
- bridle joint
- butt joint
- buttered joint
- cable joint
- capillary joint
- caulked joint
- cleat joint
- closely-spaced joints
- coax scarf joint
- cog scarf joint
- cold joint
- combed joint
- compression joint
- concave joint
- construction joint
- contraction joint
- convex joint
- corner joint
- cornerlock joint
- coursing joint
- crimped joint
- crimp upstand joint
- cross joint
- cross-lap joint
- curb joint
- cut joint
- dilatation joint
- dismountable joint
- double-shear joint
- double-S slip joint
- dovetail halving joint
- doweled contraction joint
- draw band joint
- duct flange joint
- dummy joint
- edge joint
- end joint
- end lap joint
- erection joint
- expansion joint
- face joint
- fail-safe joint
- false joint
- feather joint
- field joint
- finger joint
- fixed joint
- flanged joint
- flared joint
- flat joint
- flexible joint
- flexible ball joint
- floor joint
- floor-to-wall joint
- flush joint
- friction-type joint
- gland joint
- glued joint
- groove joint
- ground joint
- grouted joint
- half-lap joint
- halved joint
- heading joint
- head joint
- head contact joint
- head free joint
- Hercules pile joint
- hick joint
- high joint due to frost action
- hinged joint
- hinge joint
- incompressible joint
- insulated flanged pipe joint
- insulated rail joint
- isolation joint
- joggle joint
- keyed joint
- keys scarf joint
- knuckle joint
- laminated joint
- lapped joint
- lap joint
- lead joint
- lengthening joint
- lift joint
- lock joint
- longitudinal joint
- loose flange joint
- manipulative joint
- miter joint
- mortise-and-tenon joint
- mortise joint
- movement joint
- nonmanipulative joint
- oblique joint
- oblique butt joint
- open joint
- overstrained joint
- packed joint
- pin joint
- pipe expansion joint
- plain-S slip joint
- ploughed-and-tongued joint
- pocket lock joint
- pointed joint
- pressure-tight joint
- push fit joint
- rail joint
- raked joint
- rebated joint
- reinforced bar slip joint
- reinforced standing seam joint
- released joint
- resilient joint
- rigid joint
- ring seal joint
- rough-cut joint
- rustication joint
- rustic joint
- saddle joint
- sawed joint
- scarf joint
- screwed joint
- screw joint
- sealed joint
- semiflexible joint
- settlement joint
- shear joint
- shoved joint
- shrinkage joint
- shrinkage compensating concrete floor joint
- shrunk rubber ring joint
- single dovetail joint
- sleeve joint
- sliding joint
- slip joint
- solvent welded joint
- socket joint
- socket-and-spigot joint
- spalled joint
- spigot-and-socket joint
- S slip joint
- stagger joints
- steel crossing construction joint
- struck joint
- T and G joint
- tank base joint
- telescope joint
- threaded joint
- tight joint
- toggle joint
- tongue and groove joint
- tool joint
- tooled joint
- transverse joint
- treated joint
- undoweled joint
- unsealed joint
- V-shaped joint
- wall-footing joint
- warping joint
- watertight joint
- weathered joint
- welded joint
- wiped joint

соедине́ние с.

- absence automatique
- absence pour cause de maladie
- absence de chaleur affective
- absence complète d'urine dans la vessie
- absence complète de vessie
- absence congénitale du rein
- absence congénitale du rein d'un côté
- absence de contraction vésicale
- absence épileptique
- absence d'érection
- absence de fragmentation des calculs
- absence mnésique
- absence de mouvements respiratoires
- absence des pouls périphériques
- absence de protéine dans les urines
- absence simple
- absence de soins
- absence de spermatozoïdes
- absence de troubles mictionnelles
- absence vasomotrice

шов м.